STING Antibody [N23J24]

Katalog-Nr. F0361

Drucken

Biologische Beschreibung

Spezifität

STING Antibody [N23J24] erkennt endogene Spiegel des gesamten STING-Proteins.
Hintergrund

Der Stimulator von Interferon-Genen (STING) ist ein entscheidender Adapter in der angeborenen Immunität, der für die Erkennung von sowohl pathogen-abgeleiteter als auch körpereigener DNA im Zytosol verantwortlich ist. Überwiegend im endoplasmatischen Retikulum (ER) lokalisiert, spielt STING eine Schlüsselrolle im zyklischen GMP–AMP-Synthase (cGAS)–STING–Interferon (IFN)-Signalweg. Wenn aberrante doppelsträngige DNA (dsDNA) im Zytosol detektiert wird, synthetisiert cGAS 2′3′ zyklisches GMP–AMP (2’3’-cGAMP oder cGAMP), das als sekundärer Bote fungiert, indem es an STING im ER bindet und dieses aktiviert. Diese Bindung induziert eine Konformationsänderung in STING, die dessen Translokation vom ER zum perinukleären Kompartiment auslöst, wo es eine speckartige Struktur bildet und die TANK-bindende Kinase 1 (TBK1) rekrutiert. TBK1 führt dann eine konsekutive Phosphorylierung durch, die Interferon-regulierende Faktoren (IRFs) und NF-κB aktiviert, was zur Induktion von Typ-I-Interferon und anderen Immunantwortgenen führt.

Nutzungsinformationen

Anwendung WB, IP, IHC Verdünnung
WB IP IHC
1:1000 1:50 1:50 - 1:200
Reaktivität Human, Mouse, Hamster
Quelle Rabbit Monoclonal Antibody MW 42 Kda
Lagerpuffer PBS, pH 7.2+50% Glycerol+0.05% BSA+0.01% NaN₃
Lagerung
(Ab dem Datum des Erhalts)		 –20°C (avoid freeze-thaw cycles), 2 years
WB
Experimental Protocol:
 
Sample preparation
1. Tissue: Lyse the tissue sample by adding an appropriate volume of ice-cold RIPA/NP-40 Lysis Buffer (containing Protease Inhibitor Cocktail)，and homogenize the tissue at a low temperature or lyse it by sonication on ice, then incubate on ice for 30 minutes.
2. Adherent cell: Aspirate the culture medium and transfer the cells into an EP tube. Wash the cells with ice-cold PBS twice. Add an appropriate volume of RIPA/NP-40 Lysis Buffer (containing Protease Inhibitor Cocktail), sonicate to lyse the cells, and incubate on ice for 30 minutes.
3. Suspension cell: Transfer the culture medium to a pre-cooled centrifuge tube. Centrifuge and aspirate the supernatant. Wash the cells with ice-cold PBS twice.Add an appropriate volume of RIPA/NP-40 Lysis Buffer (containing Protease Inhibitor Cocktail), sonicate to lyse the cells, and incubate on ice for 30 minutes.
4. Place the lysate into a pre-cooled microcentrifuge tube. Centrifuge at 4°C for 15 min. Collect the supernatant;
5. Remove a small volume of lysate to determine the protein concentration;
6. Combine the lysate with protein loading buffer. Boil 20 µL sample under 95-100°C for 5 min. Centrifuge for 5 min after cool down on ice.
 
Electrophoretic separation
1. According to the concentration of extracted protein, load appropriate amount of protein sample and marker onto SDS-PAGE gels for electrophoresis. Recommended separating gel (lower gel) concentration: 10%. Reference Table for Selecting SDS-PAGE Separation Gel Concentrations
2. Power up 80V for 30 minutes. Then the power supply is adjusted (110 V~150 V), the Marker is observed, and the electrophoresis can be stopped when the indicator band of the predyed protein Marker where the protein is located is properly separated. (Note that the current should not be too large when electrophoresis, too large current (more than 150 mA) will cause the temperature to rise, affecting the result of running glue. If high currents cannot be avoided, an ice bath can be used to cool the bath.)
 
Transfer membrane
1. Take out the converter, soak the clip and consumables in the pre-cooled converter;
2. Activate PVDF membrane with methanol for 1 min and rinse with transfer buffer;
3. Install it in the order of "black edge of clip - sponge - filter paper - filter paper - glue -PVDF membrane - filter paper - filter paper - sponge - white edge of clip";
4. The protein was electrotransferred to PVDF membrane. ( 0.45 µm PVDF membrane is recommended ) Reference Table for Selecting PVDF Membrane Pore Size Specifications
Recommended conditions for wet transfer: 200 mA, 120 min.
( Note that the transfer conditions can be adjusted according to the protein size. For high-molecular-weight proteins, a higher current and longer transfer time are recommended. However, ensure that the transfer tank remains at a low temperature to prevent gel melting.)
 
Block
1. After electrotransfer, wash the film with TBST at room temperature for 5 minutes;
2. Incubate the film in the blocking solution for 1 hour at room temperature;
3. Wash the film with TBST for 3 times, 5 minutes each time.
 
Antibody incubation
1. Use 5% skim milk powder to prepare the primary antibody working liquid (recommended dilution ratio for primary antibody 1:1000), gently shake and incubate with the film at 4°C overnight;
2. Wash the film with TBST 3 times, 5 minutes each time;
3. Add the secondary antibody to the blocking solution and incubate with the film gently at room temperature for 1 hour;
4. After incubation, wash the film with TBST 3 times for 5 minutes each time.
 
Antibody staining
705. Add the prepared ECL luminescent substrate (or select other color developing substrate according to the second antibody) and mix evenly;
2. Incubate with the film for 1 minute, remove excess substrate (keep the film moist), wrap with plastic film, and expose in the imaging system.
IHC

Experimental Protocol：

 
Deparaffinization/Rehydration
1. Deparaffinize/hydrate sections:
2. Incubate sections in three washes of xylene for 5 min each.
3. Incubate sections in two washes of 100% ethanol for 10 min each.
4. Incubate sections in two washes of 95% ethanol for 10 min each.
5. Wash sections two times in dH2O for 5 min each.
6.Antigen retrieval: For Citrate: Heat slides in a microwave submersed in 1X citrate unmasking solution until boiling is initiated; continue with 10 min at a sub-boiling temperature (95°-98°C). Cool slides on bench top for 30 min.
 
Staining
1. Wash sections in dH2O three times for 5 min each.
2. Incubate sections in 3% hydrogen peroxide for 10 min.
3. Wash sections in dH2O two times for 5 min each.
4. Wash sections in wash buffer for 5 min.
5. Block each section with 100–400 µl of blocking solution for 1 hr at room temperature.
6. Remove blocking solution and add 100–400 µl primary antibody diluent in to each section. Incubate overnight at 4°C.
7. Remove antibody solution and wash sections with wash buffer three times for 5 min each.
8. Cover section with 1–3 drops HRPas needed. Incubate in a humidified chamber for 30 min at room temperature.
9. Wash sections three times with wash buffer for 5 min each.
10. Add DAB Chromogen Concentrate to DAB Diluent and mix well before use.
11. Apply 100–400 µl DAB to each section and monitor closely. 1–10 min generally provides an acceptable staining intensity.
12. Immerse slides in dH2O.
13. If desired, counterstain sections with hematoxylin.
14. Wash sections in dH2O two times for 5 min each.
15. Dehydrate sections: Incubate sections in 95% ethanol two times for 10 sec each; Repeat in 100% ethanol, incubating sections two times for 10 sec each; Repeat in xylene, incubating sections two times for 10 sec each.
16. Mount sections with coverslips and mounting medium.

Referenzen

  • https://pubmed.ncbi.nlm.nih.gov/36550103/

Anwendungsdaten

WB

Validiert von Selleck

  • F0361-wb
    Lane 1: 293T
    Lane 2: THP-1
    Lane 3: HT-29
    Lane 4: HaCaT
    Lane 5: HL-60
    Lane 6: A20
    Lane 7: BaF3
    Lane 8: C2C12

IHC

Validiert von Selleck

  • F0361-IHC1
    Immunohistochemical analysis of formalin fixed paraffin embedded human breast cancer tissue with F0361 at 1/100 dilution.